Author: Admin

IOS: ROMMON on the C6500/Sup720 – Sup crashed

Posted on by Admin

IOS: ROMMON on the C6500/Sup720 Recently, one of my Supervisor 720 goes into a permanent reboot cycle. I was able to break it into ROMMON mode, but I couldn’t get it to ‘stick’ the boot settings. Finally…. Finally, one of the other guys came and looked over my shoulder and pointed out that I was making two mistakes. Here is the correct syntax: rommmon 2 > BOOT=bootdisk:s72033-advipservicesk9_wan-vz.122-18.SXF14.bin rommon 3 > set PS1=rommon ! > LOG_PREFIX_VERSION=1 SLOTCACHE=cards; ACL_DENY=0…

Read More

show fabric-interconnect inventory

Posted on by Admin

show fabric-interconnect inventory To display fabric interconnect hardware information, use the show fabric-interconnect inventory command. showfabric-interconnectinventory [ id { a | b } ] [expand] [detail] Examples This example shows how to display a list of fabric interconnect hardware: switch-A# show fabric-interconnect inventory ID PID Vendor Serial (SN) HW Revision Total Memory (MB) ——– ————— —————– ———– ———– —————– A N10-S6100 Cisco Systems, In SSI12480266 0 3549 B N10-S6100 Cisco Systems, In SSI12520C81 0 3549…

Read More

error ssl_error_weak_server_ephemeral_dh_key

Posted on by Admin

Firefox Error/Bug ” error ssl_error_weak_server_ephemeral_dh_key ” Solution : Note that users with the current and older Firefox releases can toggle these prefs to false on the about:config page to disable the cipher suites that are involved with the Logjam vulnerability. security.ssl3.dhe_rsa_aes_128_sha security.ssl3.dhe_rsa_aes_256_sha Bug 1138554 – NSS accepts export-length DHE keys with regular DHE cipher suites Logjam: How Diffie-Hellman Fails in Practice: https://weakdh.org/

Read More

Cisco Bug: CSCur40004 – Need to support Multicast Music on Hold for Jabber clients

Posted on by Admin

Last Modified https://tools.cisco.com/bugsearch/bug/CSCur40004/?referring_site=bugquickviewclick Aug 21, 2015 Product Cisco Jabber for Windows Known Affected Releases 10.0(0) 10.5(2) 10.6(1) 11.0 9.0(6) 9.1(5) 9.2(7) 9.3(0) 9.6(3) 9.7(5) Description (partial) Symptom: Jabber clients do not support Multi cast MOH (MMOH) Conditions: MMOH is setup on the MRGLs used by Jabber Workaround: Use Unicast MOH for Jabber clients. Further Problem Description: This is an enhancement request.

Read More

CUCM Mixed Mode With Tokenless CTLs

Posted on by Admin

CUCM Mixed Mode With Tokenless CTLs move phones registered to the old cluster to instead register to the new cluster. Download the CallManager.pem from new cluster pub and upload that cert as phone-trust to the old cluster. This will enable the old cluster TVS to have TVS-aware phones trust     the    new cluster.     When the phone is told (say, via change in DHCP option 150 value) to register to the new cluster, it will fail…

Read More

Error Update failed. Java.sql.SQLException: Memory allocation failure during query processing

Posted on by Admin

Problem Description:   The customer was not able to change device pool in the sip trunk. it was giving error Update failed. Java.sql.SQLException: Memory allocation failure during query processing. Troubleshooting Performed Collected call manager traces, Informix logs and checked the rhosts, sqlhosts in the unified reporting page of the call manager. Rhosts and sqlhosts were fine. Checked the db replication of the customer it was fine. Suggested customer to restart A Cisco DB service of…

Read More

Installing VNC-Server

Posted on by Admin

yum check-update yum update yum groupinstall “GNOME Desktop” unlink /etc/systemd/system/default.target ln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.target Reboot I assume you have either kvm, or any other way to access console. You need to see Gnome GUI on the console  after the reboot yum install tigervnc-server xorg-x11-fonts-Type1 –y  useradd pirat9 passwd pirat9  cp /lib/systemd/system/vncserver@.service /etc/systemd/system/vncserver@:1.service Edit /etc/systemd/system/vncserver@:1.service and replace string <USER> with pirat9 systemctl daemon-reload  su – pirat9 As user pirat9 run “vncpasswd” and set vNC server password for user pirat9.  systemctl start vncserver@:1.service systemctl enable…

Read More

CUBE to Exchange 2013 Unified Messaging Interoperability

Posted on by Admin

CUBE to Exchange 2013 Unified Messaging Interoperability  Original Post # http://voipnorm.blogspot.com/ As most of you know when Microsoft moved to Exchange 2013 their architecture changed quite a bit. They introduced the Client Access Server as a new role for Unified Messaging and disbanded the UM role altogether putting the processes that ran on the UM server to the Mailbox Server role. This isn’t a big deal but what happens during an initial call setup is…

Read More

IP SLA with Object Tracking and Automatic Preempting in MPLS TE

Posted on by Admin

Original post # https://rekrowten.wordpress.com/2012/10/19/ip-sla-with-object-tracking-and-automatic-preempting-in-mpls-te-part-5/ IP SLA was described in this post. Some of the examples were provided here. This post showed an option, where IP SLA was used to monitor static routes and preempting them. Today’s post will be similar to that one. Today I am monitoring MPLS TE tunnels and dynamically preempting to backup path, when certain threshold in IP SLA probe is met. Good example on how to monitor network and dynamically and…

Read More

IP-SLA DNS Tracking

Posted on by Admin

Original Post # http://jcape.name/2011/04/23/anycast-ip-sla-howto/  Configuration to be performed on a server Configuration to be performed on the router in site A Configuration to be performed on the router in site B   The next step is to configure the routers to route packets destined for the anycast address via the primary network interface on the servers, run test queries against named on the primary network interface of that server, and remove the route to the anycast…

Read More
1 … 3,722 3,723 3,724 3,725 3,726 … 3,743