Cisco TCL script base commands
Run script !define where the scripts will be stored event manager directory user policy flash: OR event manager directory user […]
TCL Scripting
CME, CUCM, SIP
Dedug SIP trunk from CM to CUBE
Dedug SIP trunk from CM to CUBE From TAC The link below outlines how to enable detailed traces on
CME
Cisco Voice Gateway Commands mostly used
Cisco Voice Gateway Commands mostly used: Tracing a call flow sh isdn active !overview of calls going through the
Uncategorized
Skype connect with Cisco Cube Config Template
Skype connect with Cisco Cube ip domain name corp.XXXX.org ip name-server 8.8.8.8 ! voice service voip allow-connections h323 to
CME, SRST
CME SRST Template 1
CME SRST Template 1 If 9 for outside line is been removed on CUCM then need to add TP on
VCS
Cisco VCS root Password Reset/Recovery
This is based on X7.2 software, assuming your software is older but should be the same. To collect logs or
Uncategorized
My CUCM SRND Design Notes 10.X – SIP TRUNK Deployments
Best Effort Early Offer [Early Offer support for voice and video calls Best Effort (no MTP inserted)] Best Effort Early
Uncategorized
Unique RD per PE in MPLS VPN for Load Sharing and Faster Convergence
Hi Guys , I found the below link useful for Designing MPLS load sharing and Fast Convergence. Original Link# http://lostintransit.se/2015/01/11/unique-rd-per-pe-in-mpls-vpn-for-load-sharing-and-faster-convergence/
CCIE Wireless, IOS
Cisco IOS- IP Helper Address Command
Original Link# http://www.ciscopress.com/articles/article.asp?p=330807&seqNum=9 Helper Addresses This section describes how networks and routers use helper addresses to forward broadcasts to another
CUCM
Unified CM High Availability / Call Processing Redundancy / Upgrading CUCM Cluster
Unified CM High Availability Because of the underlying Unified CM clustering mechanism, a Unified Communications System has additional high availability considerations above