I finally found a thermal camera that's accurate – and I keep finding new uses for it

Regular readers will know that I am a little obsessed with thermal imaging cameras. I regularly use them built into smartphones, those that can be attached to smartphones, and standalone cameras. I use them for everything from spotting failing components on circuit boards, finding leaking pipes, finding spots in houses where heat is leaking, and problems with car brakes or cooling systems.

I’m always finding new uses for my thermal cameras. Personally, I prefer standalone ones because they are perfect for throwing into a toolbag, and are always there when you need them. 

Also: The best electric screwdrivers

Problem is, a lot of the standalone cameras are expensive, especially if you want one with decent accuracy and thermal range. But sometimes you come across one with said accuracy but without the hefty price tag — one such example is the HF96V from HSFTools.

The HF96V features a 96 x 96 IR camera along with a 640 x 480 visible camera to offer three imaging modes: thermal only, visual only, and fusion. If that 96 x 96 thermal camera sounds rather meager, don’t worry, because the image is upscaled to 240 x 240 in real-time, and it updates at a speed of 25Hz (that’s 25 times a second).  

The thermal image camera has a 50-degree field of view, wide enough to providing broad coverage during scanning, but narrow enough to allow specific components to be isolated. It also has a wide temperature range from -4°F to 1022°F (-20°C to 550°C) in increments as small as small as 0.09°F (0.05°C) with a temperature reading discrepancy within ±2%.

High quality images are vital for accurately diagnosis of faulty components – I’ve tried using cheap cameras with poor quality output and they’re just not up to the job.

The thermal camera also has the ability to cater for different distance to objects, as well as fine-tuning emissivity settings based on specific materials (such as PCBs, ceramics, rubber, to allow for more accurate temperature measurements on a variety of substances.

There’s a trigger on the thermal camera that activates a laser with a press, and takes a photo with release. This results in two photos being taken, thermal and visual, and they can be accessed from the camera or downloaded to a computer using a USB-C cable. Photos are stored on 4GB internal storage, which is enough for 30,000 images.

Also: I finally found a pocketable multitool for less than $30 that isn’t junk

The unit has a 3,350 mAh rechargeable battery using the USB-C port, and it gave me about 7.5 hours of runtime per charge. It also held its charge very well when the camera was stored.  

The tool is built tough and can survives drops onto concrete from 6 foot and is IP54 rated for dust- and water resistance (limited protection from dust ingress, and protection from water splashes from any direction). There is also a 1/4-20 threaded hole in the base of the handle for attaching the camera onto a tripod. 

ZDNET’s buying advice

The HSFTools HF96V is a superb mid-level thermal camera offering a lot more than the basic models for not much more money. The thermal output quality is more than enough for all but the most demanding professional needs, and in a package that’s built to survive a tough life and a battery that will last the average user weeks, if not months.

Usually retailing for $220, there’s currently a $50 off coupon on Amazon, bringing this thermal camera down to a very reasonable $170. 

Looking for the next best product? Get expert reviews and editor favorites with ZDNET Recommends.