Cisco NX-OS/IOS Netflow Comparison

Posted on by Admin

Cisco NX-OS/IOS Netflow Comparison Objective This tech note outlines the main differences in NetFlow between Cisco® NX-OS Software and Catalyst 6500 Sup720/Sup32 running Cisco IOS® Software. Sample configurations are included for Cisco NX-OS and Cisco IOS Software for some common features to demonstrate the similarities and differences. Please refer to the NX-OS documentation on Cisco.com for a complete list of supported features. It should be noted that the Catalyst 6500 range now ships a new…

Read More

Routing over Nexus 7000 vPC peer-link? Yes and No.

Posted on by Admin

This is a Nexus 7000 design question that comes up from time to time: In a Nexus 7000 Vpc environment, how can I form a layer 3 adjency between the two switches. Lets say I want to run OSPF and want to create two SVIs on the two switches connected via Vpc, Will the neighborship relation be formed over the Vpc Peer link or is the peer link only designed for control traffic for Vpc….

Read More

How to Calculate TCP throughput for long distance WAN links

Posted on by Admin

So you just lit up your new high-speed link between Data Centers but are unpleasantly surprised to see relatively slow file transfers across this high speed, long distance link — Bummer! Before you call Cisco TAC and start trouble shooting your network, do a quick calculation of what you should realistically expect in terms of TCP throughput from a one host to another over this long distance link. When using TCP to transfer data the…

Read More

Cisco UCS B-Series NIC Teaming & Bonding OS Support Matrices

Posted on by Admin

Cisco UCS B-Series NIC Teaming & Bonding OS Support Matrices An unsupported teaming type for the Cisco UCS B200 blade server. Their discussion made me realize that there wasn’t an easy-to-find resource for Cisco UCS customers that needed to know “OS Team Types Supported Per UCS Network Adapter” and “Unsupported Team Types”. Below you will find both of these resources. I’ve listed a chart per Cisco UCS B-Series Network Adapter that shows the teaming/bonding types that…

Read More

Distributed virtual and physical routing in VMware NSX for vSphere

Posted on by Admin

Distributed virtual and physical routing in VMware NSX for vSphere This post is intended to be a primer on the distributed routing in VMware NSX for vSphere, using a basic scenario of L3 forwarding between both virtual and physical subnets. I’m not going to bore you with all of the laborious details, just the stuff that matters for the purpose of this discussion. In VMware NSX for vSphere there are two different types of NSX routers you can deploy in your virtual network. The NSX Edge Services Router (ESR) The…

Read More

UCS 2.0: Cisco Stacks the Deck in Las Vegas

Posted on by Admin

Original Link # http://www.mseanmcgee.com/2011/07/ucs-2-0-cisco-stacks-the-deck-in-las-vegas/ In addition to the existing UCS fabric hardware, UCS customers now have a choice of a new Fabric Interconnect, a new chassis I/O module, and a new Virtual Interface Card.  The 6248UP Fabric Interconnect delivers double the throughput, almost half the latency, and more than quadruple the virtual interfaces per downlink, while the new 2208XP chassis I/O module delivers double the chassis uplink bandwidth and quadruple the server downlinks.  Last but not…

Read More

New design guide: VMware NSX with Cisco UCS and Nexus 7000

Posted on by Admin

New design guide: VMware NSX with Cisco UCS and Nexus 7000   why you would deploy VMware NSX with your Cisco UCS and Nexus gear.  The gist being that NSX adds business agility, a rich set of virtual network services, and orders of magnitude better performance and scale to these existing platforms.  The response to this piece was phenomenal with many people asking for more details on the how. The choice is clear.  To obtain a…

Read More

Junos Stretch VLAN Using SRX Branch – who needs Cisco’s OTV?

Posted on by Admin

Traditional and modern Enterprises often suffer from inflexible service providers either charging over the odds, taking forever to make changes, or providing overly complex and unreliable services. SDN is beginning to threaten the way things are done in the data centre and enterprise, moving all the complexity up to a different level. The dawn of the Overlay and Underlay networks is here. Simple flat L2 and hardware switched L3 networks are pretty much the only…

Read More

Cisco UCS Boot From SAN Video Walktrough

Posted on by Admin

Cisco UCS Boot From SAN Video Walktrough I’ve been meaning to do this video for ages and finally had some time to do it. The most common questions I tend to get are generally around booting a Cisco UCS Server from the SAN. Now in order to take full advantage of the statelessness of Cisco UCS servers we certainly want to avoid any dependency on a blade and SAN Boot is a great way to do…

Read More

Disable vMotion for a single VM

Posted on by Admin

Disable vMotion for a single VM This question pops up regularly on the VMTN forums and reddit. It’s a viable question but the admins who request this feature usually don’t want Maintenance mode to break or any other feature that helps them to manage large scale environments. When you drill down, you discover that they only want to limit the option of a manual vMotion triggered by an administrator. Instead of configuring complex DRS rules,…

Read More
1 … 3,895 3,896 3,897 3,898 3,899 … 3,903